source: main/adopters/uset/trunk/src/main/reverse_proxy/httpd.conf @ 18316

Last change on this file since 18316 was 18316, checked in by Paul Leo, 4 years ago

Removed ssl and keys, updated httpd-ssl.conf and httpd.conf

File size: 20.7 KB
Line 
1#
2# This is the main Apache HTTP server configuration file.  It contains the
3# configuration directives that give the server its instructions.
4# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
5# In particular, see
6# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
7# for a discussion of each configuration directive.
8#
9# Do NOT simply read the instructions in here without understanding
10# what they do.  They're here only as hints or reminders.  If you are unsure
11# consult the online docs. You have been warned. 
12#
13# Configuration and logfile names: If the filenames you specify for many
14# of the server's control files begin with "/" (or "drive:/" for Win32), the
15# server will use that explicit path.  If the filenames do *not* begin
16# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
17# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
18# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
19# will be interpreted as '/logs/access_log'.
20#
21# NOTE: Where filenames are specified, you must use forward slashes
22# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
23# If a drive letter is omitted, the drive on which httpd.exe is located
24# will be used by default.  It is recommended that you always supply
25# an explicit drive letter in absolute paths to avoid confusion.
26
27#
28# ServerRoot: The top of the directory tree under which the server's
29# configuration, error, and log files are kept.
30#
31# Do not add a slash at the end of the directory path.  If you point
32# ServerRoot at a non-local disk, be sure to specify a local disk on the
33# Mutex directive, if file-based mutexes are used.  If you wish to share the
34# same ServerRoot for multiple httpd daemons, you will need to change at
35# least PidFile.
36#
37Define SRVROOT "c:/Apache24"
38
39ServerRoot "${SRVROOT}"
40
41#
42# Mutex: Allows you to set the mutex mechanism and mutex file directory
43# for individual mutexes, or change the global defaults
44#
45# Uncomment and change the directory if mutexes are file-based and the default
46# mutex file directory is not on a local disk or is not appropriate for some
47# other reason.
48#
49# Mutex default:logs
50
51#
52# Listen: Allows you to bind Apache to specific IP addresses and/or
53# ports, instead of the default. See also the <VirtualHost>
54# directive.
55#
56# Change this to Listen on specific IP addresses as shown below to
57# prevent Apache from glomming onto all bound IP addresses.
58#
59#Listen 12.34.56.78:80
60
61##########Listen 80    ##### Only listening on port 443 which is configured in  in  conf/extra/httpd-ssl.conf 
62
63#<VirtualHost *:443 --Configured in *******  conf/extra/httpd-ssl.conf  ******* >
64#  The Reverse Proxy is configured in the above virtual host  in conf/extra/httpd-ssl.conf
65
66#
67# Dynamic Shared Object (DSO) Support
68#
69# To be able to use the functionality of a module which was built as a DSO you
70# have to place corresponding `LoadModule' lines at this location so the
71# directives contained in it are actually available _before_ they are used.
72# Statically compiled modules (those listed by `httpd -l') do not need
73# to be loaded here.
74#
75# Example:
76# LoadModule foo_module modules/mod_foo.so
77#
78LoadModule access_compat_module modules/mod_access_compat.so
79LoadModule actions_module modules/mod_actions.so
80LoadModule alias_module modules/mod_alias.so
81LoadModule allowmethods_module modules/mod_allowmethods.so
82LoadModule asis_module modules/mod_asis.so
83LoadModule auth_basic_module modules/mod_auth_basic.so
84#LoadModule auth_digest_module modules/mod_auth_digest.so
85#LoadModule auth_form_module modules/mod_auth_form.so
86#LoadModule authn_anon_module modules/mod_authn_anon.so
87LoadModule authn_core_module modules/mod_authn_core.so
88#LoadModule authn_dbd_module modules/mod_authn_dbd.so
89#LoadModule authn_dbm_module modules/mod_authn_dbm.so
90LoadModule authn_file_module modules/mod_authn_file.so
91#LoadModule authn_socache_module modules/mod_authn_socache.so
92#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
93#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
94LoadModule authz_core_module modules/mod_authz_core.so
95#LoadModule authz_dbd_module modules/mod_authz_dbd.so
96#LoadModule authz_dbm_module modules/mod_authz_dbm.so
97LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
98LoadModule authz_host_module modules/mod_authz_host.so
99#LoadModule authz_owner_module modules/mod_authz_owner.so
100LoadModule authz_user_module modules/mod_authz_user.so
101LoadModule autoindex_module modules/mod_autoindex.so
102#LoadModule brotli_module modules/mod_brotli.so
103#LoadModule buffer_module modules/mod_buffer.so
104#LoadModule cache_module modules/mod_cache.so
105#LoadModule cache_disk_module modules/mod_cache_disk.so
106#LoadModule cache_socache_module modules/mod_cache_socache.so
107#LoadModule cern_meta_module modules/mod_cern_meta.so
108LoadModule cgi_module modules/mod_cgi.so
109#LoadModule charset_lite_module modules/mod_charset_lite.so
110#LoadModule data_module modules/mod_data.so
111#LoadModule dav_module modules/mod_dav.so
112#LoadModule dav_fs_module modules/mod_dav_fs.so
113#LoadModule dav_lock_module modules/mod_dav_lock.so
114#LoadModule dbd_module modules/mod_dbd.so
115#LoadModule deflate_module modules/mod_deflate.so
116# 10-17-2013 paul commented out LoadModule dir_module modules/mod_dir.so
117#LoadModule dumpio_module modules/mod_dumpio.so
118LoadModule env_module modules/mod_env.so
119#LoadModule expires_module modules/mod_expires.so
120#LoadModule ext_filter_module modules/mod_ext_filter.so
121#LoadModule file_cache_module modules/mod_file_cache.so
122#LoadModule filter_module modules/mod_filter.so
123#LoadModule http2_module modules/mod_http2.so
124#LoadModule headers_module modules/mod_headers.so
125#LoadModule heartbeat_module modules/mod_heartbeat.so
126#LoadModule heartmonitor_module modules/mod_heartmonitor.so
127#LoadModule ident_module modules/mod_ident.so
128#LoadModule imagemap_module modules/mod_imagemap.so
129LoadModule include_module modules/mod_include.so
130#LoadModule info_module modules/mod_info.so
131## LoadModule isapi_module modules/mod_isapi.so Paul commented out, don't believe we need this
132#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
133#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
134#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
135#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
136#LoadModule ldap_module modules/mod_ldap.so
137#LoadModule logio_module modules/mod_logio.so
138LoadModule log_config_module modules/mod_log_config.so
139#LoadModule log_debug_module modules/mod_log_debug.so
140#LoadModule log_forensic_module modules/mod_log_forensic.so
141#LoadModule lua_module modules/mod_lua.so
142#LoadModule macro_module modules/mod_macro.so
143#LoadModule md_module modules/mod_md.so
144LoadModule mime_module modules/mod_mime.so
145#LoadModule mime_magic_module modules/mod_mime_magic.so
146LoadModule negotiation_module modules/mod_negotiation.so
147LoadModule proxy_module modules/mod_proxy.so
148#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
149#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
150#LoadModule proxy_connect_module modules/mod_proxy_connect.so
151#LoadModule proxy_express_module modules/mod_proxy_express.so
152#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
153#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
154#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
155LoadModule proxy_html_module modules/mod_proxy_html.so
156LoadModule proxy_http_module modules/mod_proxy_http.so
157#LoadModule proxy_http2_module modules/mod_proxy_http2.so
158#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
159#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
160#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
161#LoadModule ratelimit_module modules/mod_ratelimit.so
162#LoadModule reflector_module modules/mod_reflector.so
163LoadModule remoteip_module modules/mod_remoteip.so
164#LoadModule request_module modules/mod_request.so
165#LoadModule reqtimeout_module modules/mod_reqtimeout.so
166LoadModule rewrite_module modules/mod_rewrite.so
167#LoadModule sed_module modules/mod_sed.so
168#LoadModule session_module modules/mod_session.so
169#LoadModule session_cookie_module modules/mod_session_cookie.so
170#LoadModule session_crypto_module modules/mod_session_crypto.so
171#LoadModule session_dbd_module modules/mod_session_dbd.so
172LoadModule setenvif_module modules/mod_setenvif.so
173#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
174#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
175#LoadModule socache_dbm_module modules/mod_socache_dbm.so
176#LoadModule socache_memcache_module modules/mod_socache_memcache.so
177LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
178#LoadModule speling_module modules/mod_speling.so
179LoadModule ssl_module modules/mod_ssl.so
180#LoadModule status_module modules/mod_status.so
181#LoadModule substitute_module modules/mod_substitute.so
182#LoadModule unique_id_module modules/mod_unique_id.so
183#LoadModule userdir_module modules/mod_userdir.so
184#LoadModule usertrack_module modules/mod_usertrack.so
185#LoadModule version_module modules/mod_version.so
186#LoadModule vhost_alias_module modules/mod_vhost_alias.so
187#LoadModule watchdog_module modules/mod_watchdog.so
188LoadModule xml2enc_module modules/mod_xml2enc.so
189
190<IfModule unixd_module>
191#
192# If you wish httpd to run as a different user or group, you must run
193# httpd as root initially and it will switch. 
194#
195# User/Group: The name (or #number) of the user/group to run httpd as.
196# It is usually good practice to create a dedicated user and group for
197# running httpd, as with most system services.
198#
199User daemon
200Group daemon
201
202</IfModule>
203
204# 'Main' server configuration
205#
206# The directives in this section set up the values used by the 'main'
207# server, which responds to any requests that aren't handled by a
208# <VirtualHost> definition.  These values also provide defaults for
209# any <VirtualHost> containers you may define later in the file.
210#
211# All of these directives may appear inside <VirtualHost> containers,
212# in which case these default settings will be overridden for the
213# virtual host being defined.
214#
215
216#
217# ServerAdmin: Your address, where problems with the server should be
218# e-mailed.  This address appears on some server-generated pages, such
219# as error documents.  e.g. admin@your-domain.com
220#
221ServerAdmin jmiller@usetinc.org
222
223#
224# ServerName gives the name and port that the server uses to identify itself.
225# This can often be determined automatically, but we recommend you specify
226# it explicitly to prevent problems during startup.
227#
228# If your host doesn't have a registered DNS name, enter its IP address here.
229#
230#ServerName www.example.com:80
231#ServerName 10.32.0.6:80
232#
233# Deny access to the entirety of your server's filesystem. You must
234# explicitly permit access to web content directories in other
235# <Directory> blocks below.
236#
237<Directory />
238    AllowOverride none
239    Require all denied
240</Directory>
241
242#
243# Note that from this point forward you must specifically allow
244# particular features to be enabled - so if something's not working as
245# you might expect, make sure that you have specifically enabled it
246# below.
247#
248
249#
250# DocumentRoot: The directory out of which you will serve your
251# documents. By default, all requests are taken from this directory, but
252# symbolic links and aliases may be used to point to other locations.
253#
254DocumentRoot "${SRVROOT}/htdocs"
255<Directory "${SRVROOT}/htdocs">
256    #
257    # Possible values for the Options directive are "None", "All",
258    # or any combination of:
259    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
260    #
261    # Note that "MultiViews" must be named *explicitly* --- "Options All"
262    # doesn't give it to you.
263    #
264    # The Options directive is both complicated and important.  Please see
265    # http://httpd.apache.org/docs/2.4/mod/core.html#options
266    # for more information.
267    #
268    #Options Indexes FollowSymLinks
269        Options None
270
271    #
272    # AllowOverride controls what directives may be placed in .htaccess files.
273    # It can be "All", "None", or any combination of the keywords:
274    #   AllowOverride FileInfo AuthConfig Limit
275    #
276    AllowOverride None
277
278    #
279    # Controls who can get stuff from this server.
280    #
281    #Require all granted
282        Require all denied
283</Directory>
284
285#MAY WANT TO GET RID OF THIS AS WELL - OR NOT LOAD DIR_MODULE
286
287#
288# DirectoryIndex: sets the file that Apache will serve if a directory
289# is requested.
290#
291<IfModule dir_module>
292    DirectoryIndex index.html
293</IfModule>
294
295#
296# The following lines prevent .htaccess and .htpasswd files from being
297# viewed by Web clients.
298#
299<Files ".ht*">
300    Require all denied
301</Files>
302
303#
304# ErrorLog: The location of the error log file.
305# If you do not specify an ErrorLog directive within a <VirtualHost>
306# container, error messages relating to that virtual host will be
307# logged here.  If you *do* define an error logfile for a <VirtualHost>
308# container, that host's errors will be logged there and not here.
309#
310ErrorLog "logs/error.log"
311
312#
313# LogLevel: Control the number of messages logged to the error_log.
314# Possible values include: debug, info, notice, warn, error, crit,
315# alert, emerg.
316# warn was the default
317LogLevel warn           
318#LogLevel debug
319#LogLevel trace6
320#LogLevel trace2
321
322
323<IfModule log_config_module>
324    #
325    # The following directives define some format nicknames for use with
326    # a CustomLog directive (see below).
327    #
328    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
329    LogFormat "%h %l %u %t \"%r\" %>s %b" common
330
331    <IfModule logio_module>
332      # You need to enable mod_logio.c to use %I and %O
333      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
334    </IfModule>
335
336    #
337    # The location and format of the access logfile (Common Logfile Format).
338    # If you do not define any access logfiles within a <VirtualHost>
339    # container, they will be logged here.  Contrariwise, if you *do*
340    # define per-<VirtualHost> access logfiles, transactions will be
341    # logged therein and *not* in this file.
342    #
343    #CustomLog "logs/access.log" common
344
345    #
346    # If you prefer a logfile with access, agent, and referer information
347    # (Combined Logfile Format) you can use the following directive.
348    #
349    #CustomLog "logs/access.log" combined
350</IfModule>
351
352<IfModule alias_module>
353    #
354    # Redirect: Allows you to tell clients about documents that used to
355    # exist in your server's namespace, but do not anymore. The client
356    # will make a new request for the document at its new location.
357    # Example:
358    # Redirect permanent /foo http://www.example.com/bar
359
360    #
361    # Alias: Maps web paths into filesystem paths and is used to
362    # access content that does not live under the DocumentRoot.
363    # Example:
364    # Alias /webpath /full/filesystem/path
365    #
366    # If you include a trailing / on /webpath then the server will
367    # require it to be present in the URL.  You will also likely
368    # need to provide a <Directory> section to allow access to
369    # the filesystem path.
370
371    #
372    # ScriptAlias: This controls which directories contain server scripts.
373    # ScriptAliases are essentially the same as Aliases, except that
374    # documents in the target directory are treated as applications and
375    # run by the server when requested rather than as documents sent to the
376    # client.  The same rules about trailing "/" apply to ScriptAlias
377    # directives as to Alias.
378    #
379    ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"
380
381</IfModule>
382
383<IfModule cgid_module>
384    #
385    # ScriptSock: On threaded servers, designate the path to the UNIX
386    # socket used to communicate with the CGI daemon of mod_cgid.
387    #
388    #Scriptsock cgisock
389</IfModule>
390
391#
392# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased
393# CGI directory exists, if you have that configured.
394#
395<Directory "${SRVROOT}/cgi-bin">
396    AllowOverride None
397    Options None
398    Require all denied
399</Directory>
400
401<IfModule headers_module>
402    #
403    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
404    # backend servers which have lingering "httpoxy" defects.
405    # 'Proxy' request header is undefined by the IETF, not listed by IANA
406    #
407    RequestHeader unset Proxy early
408</IfModule>
409
410<IfModule mime_module>
411    #
412    # TypesConfig points to the file containing the list of mappings from
413    # filename extension to MIME-type.
414    #
415    TypesConfig conf/mime.types
416
417    #
418    # AddType allows you to add to or override the MIME configuration
419    # file specified in TypesConfig for specific file types.
420    #
421    #AddType application/x-gzip .tgz
422    #
423    # AddEncoding allows you to have certain browsers uncompress
424    # information on the fly. Note: Not all browsers support this.
425    #
426    #AddEncoding x-compress .Z
427    #AddEncoding x-gzip .gz .tgz
428    #
429    # If the AddEncoding directives above are commented-out, then you
430    # probably should define those extensions to indicate media types:
431    #
432    AddType application/x-compress .Z
433    AddType application/x-gzip .gz .tgz
434
435    #
436    # AddHandler allows you to map certain file extensions to "handlers":
437    # actions unrelated to filetype. These can be either built into the server
438    # or added with the Action directive (see below)
439    #
440    # To use CGI scripts outside of ScriptAliased directories:
441    # (You will also need to add "ExecCGI" to the "Options" directive.)
442    #
443    #AddHandler cgi-script .cgi
444
445    # For type maps (negotiated resources):
446    #AddHandler type-map var
447
448    #
449    # Filters allow you to process content before it is sent to the client.
450    #
451    # To parse .shtml files for server-side includes (SSI):
452    # (You will also need to add "Includes" to the "Options" directive.)
453    #
454    #AddType text/html .shtml
455    #AddOutputFilter INCLUDES .shtml
456</IfModule>
457
458#
459# The mod_mime_magic module allows the server to use various hints from the
460# contents of the file itself to determine its type.  The MIMEMagicFile
461# directive tells the module where the hint definitions are located.
462#
463#MIMEMagicFile conf/magic
464
465#
466# Customizable error responses come in three flavors:
467# 1) plain text 2) local redirects 3) external redirects
468#
469# Some examples:
470#ErrorDocument 500 "The server made a boo boo."
471#ErrorDocument 404 /missing.html
472#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
473#ErrorDocument 402 http://www.example.com/subscription_info.html
474#
475
476#
477# MaxRanges: Maximum number of Ranges in a request before
478# returning the entire resource, or one of the special
479# values 'default', 'none' or 'unlimited'.
480# Default setting is to accept 200 Ranges.
481#MaxRanges unlimited
482
483#
484# EnableMMAP and EnableSendfile: On systems that support it,
485# memory-mapping or the sendfile syscall may be used to deliver
486# files.  This usually improves server performance, but must
487# be turned off when serving from networked-mounted
488# filesystems or if support for these functions is otherwise
489# broken on your system.
490# Defaults: EnableMMAP On, EnableSendfile Off
491#
492#EnableMMAP off
493#EnableSendfile on
494
495# Supplemental configuration
496#
497# The configuration files in the conf/extra/ directory can be
498# included to add extra features or to modify the default configuration of
499# the server, or you may simply copy their contents here and change as
500# necessary.
501
502# Server-pool management (MPM specific)
503#Include conf/extra/httpd-mpm.conf
504
505# Multi-language error messages
506#Include conf/extra/httpd-multilang-errordoc.conf
507
508# Fancy directory listings
509#Include conf/extra/httpd-autoindex.conf
510
511# Language settings
512#Include conf/extra/httpd-languages.conf
513
514# User home directories
515#Include conf/extra/httpd-userdir.conf
516
517# Real-time info on requests and configuration
518#Include conf/extra/httpd-info.conf
519
520# Virtual hosts
521# Include conf/extra/httpd-vhosts.conf
522
523# Local access to the Apache HTTP Server Manual
524#Include conf/extra/httpd-manual.conf
525
526# Distributed authoring and versioning (WebDAV)
527#Include conf/extra/httpd-dav.conf
528
529# Various default settings
530#Include conf/extra/httpd-default.conf
531
532# Configure mod_proxy_html to understand HTML4/XHTML1
533#<IfModule proxy_html_module>
534#Include conf/extra/proxy-html.conf
535#</IfModule>
536
537# Secure (SSL/TLS) connections
538Include conf/extra/httpd-ssl.conf
539#
540# Note: The following must must be present to support
541#       starting without SSL on platforms with no /dev/random equivalent
542#       but a statically compiled-in mod_ssl.
543#
544<IfModule ssl_module>
545SSLRandomSeed startup builtin
546SSLRandomSeed connect builtin
547</IfModule>
548
549RemoteIPHeader X-Client-IP
550RemoteIPInternalProxy 10.32.0.0/24
551RemoteIPTrustedProxy 10.32.0.0/24
552
Note: See TracBrowser for help on using the repository browser.