source: main/adopters/nm/trunk/src/main/serverconfigs/sas_server_dohr2simnmibis1/apache_httpd/httpd.conf @ 25255

Last change on this file since 25255 was 25255, checked in by Paul Leo, 3 months ago

IBIS V3 Architecture
Updating Apache httpd SAS Server configs

File size: 24.0 KB
Line 
1#
2# This is the main Apache HTTP server configuration file.  It contains the
3# configuration directives that give the server its instructions.
4# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
5# In particular, see
6# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
7# for a discussion of each configuration directive.
8#
9# Do NOT simply read the instructions in here without understanding
10# what they do.  They're here only as hints or reminders.  If you are unsure
11# consult the online docs. You have been warned. 
12#
13# Configuration and logfile names: If the filenames you specify for many
14# of the server's control files begin with "/" (or "drive:/" for Win32), the
15# server will use that explicit path.  If the filenames do *not* begin
16# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
17# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
18# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
19# will be interpreted as '/logs/access_log'.
20#
21# NOTE: Where filenames are specified, you must use forward slashes
22# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
23# If a drive letter is omitted, the drive on which httpd.exe is located
24# will be used by default.  It is recommended that you always supply
25# an explicit drive letter in absolute paths to avoid confusion.
26
27#
28# ServerRoot: The top of the directory tree under which the server's
29# configuration, error, and log files are kept.
30#
31# Do not add a slash at the end of the directory path.  If you point
32# ServerRoot at a non-local disk, be sure to specify a local disk on the
33# Mutex directive, if file-based mutexes are used.  If you wish to share the
34# same ServerRoot for multiple httpd daemons, you will need to change at
35# least PidFile.
36#
37Define SRVROOT "C:/Apache-2.4.52"
38
39ServerRoot "${SRVROOT}"
40
41#
42# Mutex: Allows you to set the mutex mechanism and mutex file directory
43# for individual mutexes, or change the global defaults
44#
45# Uncomment and change the directory if mutexes are file-based and the default
46# mutex file directory is not on a local disk or is not appropriate for some
47# other reason.
48#
49# Mutex default:logs
50
51#
52# Listen: Allows you to bind Apache to specific IP addresses and/or
53# ports, instead of the default. See also the <VirtualHost>
54# directive.
55#
56# Change this to Listen on specific IP addresses as shown below to
57# prevent Apache from glomming onto all bound IP addresses.
58#
59#Listen 12.34.56.78:80
60Listen 80
61
62#Increase Connection Timeout Value to 15 minutes (900 seconds)
63TimeOut 600
64
65#
66# Dynamic Shared Object (DSO) Support
67#
68# To be able to use the functionality of a module which was built as a DSO you
69# have to place corresponding `LoadModule' lines at this location so the
70# directives contained in it are actually available _before_ they are used.
71# Statically compiled modules (those listed by `httpd -l') do not need
72# to be loaded here.
73#
74# Example:
75# LoadModule foo_module modules/mod_foo.so
76#
77#LoadModule access_compat_module modules/mod_access_compat.so
78LoadModule actions_module modules/mod_actions.so
79LoadModule alias_module modules/mod_alias.so
80LoadModule allowmethods_module modules/mod_allowmethods.so
81LoadModule asis_module modules/mod_asis.so
82LoadModule auth_basic_module modules/mod_auth_basic.so
83#LoadModule auth_digest_module modules/mod_auth_digest.so
84#LoadModule auth_form_module modules/mod_auth_form.so
85#LoadModule authn_anon_module modules/mod_authn_anon.so
86LoadModule authn_core_module modules/mod_authn_core.so
87#LoadModule authn_dbd_module modules/mod_authn_dbd.so
88#LoadModule authn_dbm_module modules/mod_authn_dbm.so
89LoadModule authn_file_module modules/mod_authn_file.so
90#LoadModule authn_socache_module modules/mod_authn_socache.so
91#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
92#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
93LoadModule authz_core_module modules/mod_authz_core.so
94#LoadModule authz_dbd_module modules/mod_authz_dbd.so
95#LoadModule authz_dbm_module modules/mod_authz_dbm.so
96LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
97LoadModule authz_host_module modules/mod_authz_host.so
98#LoadModule authz_owner_module modules/mod_authz_owner.so
99LoadModule authz_user_module modules/mod_authz_user.so
100LoadModule autoindex_module modules/mod_autoindex.so
101#LoadModule brotli_module modules/mod_brotli.so
102#LoadModule buffer_module modules/mod_buffer.so
103#LoadModule cache_module modules/mod_cache.so
104#LoadModule cache_disk_module modules/mod_cache_disk.so
105#LoadModule cache_socache_module modules/mod_cache_socache.so
106#LoadModule cern_meta_module modules/mod_cern_meta.so
107LoadModule cgi_module modules/mod_cgi.so
108#LoadModule charset_lite_module modules/mod_charset_lite.so
109#LoadModule data_module modules/mod_data.so
110#LoadModule dav_module modules/mod_dav.so
111#LoadModule dav_fs_module modules/mod_dav_fs.so
112#LoadModule dav_lock_module modules/mod_dav_lock.so
113#LoadModule dbd_module modules/mod_dbd.so
114#LoadModule deflate_module modules/mod_deflate.so
115LoadModule dir_module modules/mod_dir.so
116#LoadModule dumpio_module modules/mod_dumpio.so
117LoadModule env_module modules/mod_env.so
118#LoadModule expires_module modules/mod_expires.so
119#LoadModule ext_filter_module modules/mod_ext_filter.so
120#LoadModule file_cache_module modules/mod_file_cache.so
121#LoadModule filter_module modules/mod_filter.so
122#LoadModule http2_module modules/mod_http2.so
123#LoadModule headers_module modules/mod_headers.so
124#LoadModule heartbeat_module modules/mod_heartbeat.so
125#LoadModule heartmonitor_module modules/mod_heartmonitor.so
126#LoadModule ident_module modules/mod_ident.so
127#LoadModule imagemap_module modules/mod_imagemap.so
128LoadModule include_module modules/mod_include.so
129#LoadModule info_module modules/mod_info.so
130LoadModule isapi_module modules/mod_isapi.so
131#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
132#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
133#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
134#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
135#LoadModule ldap_module modules/mod_ldap.so
136#LoadModule logio_module modules/mod_logio.so
137LoadModule log_config_module modules/mod_log_config.so
138#LoadModule log_debug_module modules/mod_log_debug.so
139#LoadModule log_forensic_module modules/mod_log_forensic.so
140#LoadModule lua_module modules/mod_lua.so
141#LoadModule macro_module modules/mod_macro.so
142#LoadModule md_module modules/mod_md.so
143LoadModule mime_module modules/mod_mime.so
144#LoadModule mime_magic_module modules/mod_mime_magic.so
145LoadModule negotiation_module modules/mod_negotiation.so
146#LoadModule proxy_module modules/mod_proxy.so
147#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
148#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
149#LoadModule proxy_connect_module modules/mod_proxy_connect.so
150#LoadModule proxy_express_module modules/mod_proxy_express.so
151#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
152#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
153#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
154#LoadModule proxy_html_module modules/mod_proxy_html.so
155#LoadModule proxy_http_module modules/mod_proxy_http.so
156#LoadModule proxy_http2_module modules/mod_proxy_http2.so
157#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
158#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
159#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
160#LoadModule ratelimit_module modules/mod_ratelimit.so
161#LoadModule reflector_module modules/mod_reflector.so
162#LoadModule remoteip_module modules/mod_remoteip.so
163#LoadModule request_module modules/mod_request.so
164#LoadModule reqtimeout_module modules/mod_reqtimeout.so
165#LoadModule rewrite_module modules/mod_rewrite.so
166#LoadModule sed_module modules/mod_sed.so
167#LoadModule session_module modules/mod_session.so
168#LoadModule session_cookie_module modules/mod_session_cookie.so
169#LoadModule session_crypto_module modules/mod_session_crypto.so
170#LoadModule session_dbd_module modules/mod_session_dbd.so
171LoadModule setenvif_module modules/mod_setenvif.so
172#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
173#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
174#LoadModule socache_dbm_module modules/mod_socache_dbm.so
175#LoadModule socache_memcache_module modules/mod_socache_memcache.so
176#LoadModule socache_redis_module modules/mod_socache_redis.so
177LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
178#LoadModule speling_module modules/mod_speling.so
179LoadModule ssl_module modules/mod_ssl.so
180#LoadModule status_module modules/mod_status.so
181#LoadModule substitute_module modules/mod_substitute.so
182#LoadModule unique_id_module modules/mod_unique_id.so
183#LoadModule userdir_module modules/mod_userdir.so
184#LoadModule usertrack_module modules/mod_usertrack.so
185#LoadModule version_module modules/mod_version.so
186#LoadModule vhost_alias_module modules/mod_vhost_alias.so
187#LoadModule watchdog_module modules/mod_watchdog.so
188#LoadModule xml2enc_module modules/mod_xml2enc.so
189
190<IfModule unixd_module>
191#
192# If you wish httpd to run as a different user or group, you must run
193# httpd as root initially and it will switch. 
194#
195# User/Group: The name (or #number) of the user/group to run httpd as.
196# It is usually good practice to create a dedicated user and group for
197# running httpd, as with most system services.
198#
199User daemon
200Group daemon
201
202</IfModule>
203
204# 'Main' server configuration
205#
206# The directives in this section set up the values used by the 'main'
207# server, which responds to any requests that aren't handled by a
208# <VirtualHost> definition.  These values also provide defaults for
209# any <VirtualHost> containers you may define later in the file.
210#
211# All of these directives may appear inside <VirtualHost> containers,
212# in which case these default settings will be overridden for the
213# virtual host being defined.
214#
215
216#
217# ServerAdmin: Your address, where problems with the server should be
218# e-mailed.  This address appears on some server-generated pages, such
219# as error documents.  e.g. admin@your-domain.com
220#
221ServerAdmin admin@example.com
222
223#
224# ServerName gives the name and port that the server uses to identify itself.
225# This can often be determined automatically, but we recommend you specify
226# it explicitly to prevent problems during startup.
227#
228# If your host doesn't have a registered DNS name, enter its IP address here.
229#
230#ServerName www.example.com:80
231#ServerName 10.8.4.49
232ServerName DOHR2SIMIBIS1
233
234#
235# Deny access to the entirety of your server's filesystem. You must
236# explicitly permit access to web content directories in other
237# <Directory> blocks below.
238#
239<Directory />
240    AllowOverride none
241    Require all denied
242</Directory>
243
244#
245# Note that from this point forward you must specifically allow
246# particular features to be enabled - so if something's not working as
247# you might expect, make sure that you have specifically enabled it
248# below.
249#
250
251#
252# DocumentRoot: The directory out of which you will serve your
253# documents. By default, all requests are taken from this directory, but
254# symbolic links and aliases may be used to point to other locations.
255#
256DocumentRoot "${SRVROOT}/htdocs"
257<Directory "${SRVROOT}/htdocs">
258    #
259    # Possible values for the Options directive are "None", "All",
260    # or any combination of:
261    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
262    #
263    # Note that "MultiViews" must be named *explicitly* --- "Options All"
264    # doesn't give it to you.
265    #
266    # The Options directive is both complicated and important.  Please see
267    # http://httpd.apache.org/docs/2.4/mod/core.html#options
268    # for more information.
269    #
270    #Options Indexes FollowSymLinks
271        Options -FollowSymLinks
272
273    #
274    # AllowOverride controls what directives may be placed in .htaccess files.
275    # It can be "All", "None", or any combination of the keywords:
276    #   AllowOverride FileInfo AuthConfig Limit
277    #
278    AllowOverride None
279
280    #
281    # Controls who can get stuff from this server.
282    #
283    Require all granted
284</Directory>
285
286#
287# DirectoryIndex: sets the file that Apache will serve if a directory
288# is requested.
289#
290<IfModule dir_module>
291    DirectoryIndex index.html
292</IfModule>
293
294#
295# The following lines prevent .htaccess and .htpasswd files from being
296# viewed by Web clients.
297#
298<Files ".ht*">
299    Require all denied
300</Files>
301
302#
303# ErrorLog: The location of the error log file.
304# If you do not specify an ErrorLog directive within a <VirtualHost>
305# container, error messages relating to that virtual host will be
306# logged here.  If you *do* define an error logfile for a <VirtualHost>
307# container, that host's errors will be logged there and not here.
308#
309#ErrorLog "logs/error.log"
310
311# For use of rotatelogs, see https://httpd.apache.org/docs/2.4/programs/rotatelogs.html
312# am using rotate every day and keep 7 days, could keep more.
313# you could also rotate at midnight and create a log with date, but keeping only x logs will not work with that
314### NOTE: -c not permitted in windows, may be other options also not permitted, see explanation in next section log_conf_module
315# -v is verbose output for debugging, BUT...
316# try first with access, if you try with Errorlog, and you have something wrong, no log will be produced.
317# note daily is 86400, testing is 60 (every minute)
318# Next line is for testing log rotation every 20 seconds, keep 7 files, verbose output
319# ErrorLog "|bin/rotatelogs.exe -l -v -n 7 logs/error.log 20"
320# Next line is for production, rotate every day, keep 14 logs
321ErrorLog "|bin/rotatelogs.exe -l -v -n 14 logs/error.log 86400"
322
323
324#
325# LogLevel: Control the number of messages logged to the error_log.
326# Possible values include: debug, info, notice, warn, error, crit,
327# alert, emerg.
328#
329#LogLevel debug
330#LogLevel warn
331#LogLevel ssl:trace5
332Loglevel warn
333
334<IfModule log_config_module>
335    #
336    # The following directives define some format nicknames for use with
337    # a CustomLog directive (see below).
338    #
339    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
340    LogFormat "%h %l %u %t \"%r\" %>s %b" common
341
342    <IfModule logio_module>
343      # You need to enable mod_logio.c to use %I and %O
344      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
345    </IfModule>
346
347    #
348    # The location and format of the access logfile (Common Logfile Format).
349    # If you do not define any access logfiles within a <VirtualHost>
350    # container, they will be logged here.  Contrariwise, if you *do*
351    # define per-<VirtualHost> access logfiles, transactions will be
352    # logged therein and *not* in this file.
353    #
354    #CustomLog "logs/access.log" common
355
356    #
357    # If you prefer a logfile with access, agent, and referer information
358    # (Combined Logfile Format) you can use the following directive.
359    #
360    #CustomLog "logs/access.log" combined
361
362        # For use of rotatelogs, see https://httpd.apache.org/docs/2.4/programs/rotatelogs.html
363        # This is the error and usage output from failing config using -c, note: there is no -c even though link above shows it, but that must be for linux/unix version_module
364
365        ###AH00106: piped log program 'bin/rotatelogs.exe -l -f -v -c -n 14 logs/access.log 86400' failed unexpectedly
366        ###rotatelogs.exe: illegal option -- c
367        ###Usage: C:\Apache-2.4.51\bin\rotatelogs.exe [-v] [-l] [-L linkname] [-p prog] [-f] [-D] [-t] [-e] [-n number] <logfile> {<rotation time in seconds>|<rotation size>(B|K|M|G)} [offset minutes from UTC]
368        ###
369        ###Add this:
370        ###
371        ###TransferLog "|C:\Apache-2.4.51\bin\rotatelogs.exe /some/where 86400"
372        ###
373        ###or
374        ###
375        ###TransferLog "|C:\Apache-2.4.51\bin\rotatelogs.exe /some/where 5M"
376        ###
377        ###to httpd.conf. By default, the generated name will be
378        ###<logfile>.nnnn where nnnn is the system time at which the log
379        ###nominally starts (N.B. if using a rotation time, the time will
380        ###always be a multiple of the rotation time, so you can synchronize
381        ###cron scripts with it). If <logfile> contains strftime conversion
382        ###specifications, those will be used instead. At the end of each
383        ###rotation time or when the file size is reached a new log is
384        ###started.
385        ###
386        ###Options:
387        ###  -v       Verbose operation. Messages are written to stderr.
388        ###  -l       Base rotation on local time instead of UTC.
389        ###  -L path  Create hard link from current log to specified path.
390        ###  -p prog  Run specified program after opening a new log file. See below.
391        ###  -f       Force opening of log on program start.
392        ###  -D       Create parent directories of log file.
393        ###  -t       Truncate logfile instead of rotating, tail friendly.
394        ###  -e       Echo log to stdout for further processing.
395        ###  -n num   Rotate file by adding suffixes '.1', '.2', ..., '.num'.
396        ###
397        ###The program for '-p' is invoked as "[prog] <curfile> [<prevfile>]"
398        ###where <curfile> is the filename of the newly opened logfile, and
399        ###<prevfile>, if given, is the filename of the previously used logfile.
400       
401        # am using rotate every day and keep 7 days, could keep more.
402        # you could also rotate at midnight and create a log with date, but keeping only x logs will not work with that
403        # -c not permitted in windows, may be other options also not permitted
404        # -v is verbose output for debugging
405
406        # Next line is for testing log rotation every 20 seconds, keep 7 logs, verbose output
407        #CustomLog "|bin/rotatelogs.exee -l -f -v -n 7 logs/access_log 20" combined
408        # Next line is for production, rotate logs daily, keep 14 logs
409        CustomLog "|bin/rotatelogs.exe -l -f -v -n 14 logs/access.log 86400" combined
410       
411</IfModule>
412
413<IfModule alias_module>
414    #
415    # Redirect: Allows you to tell clients about documents that used to
416    # exist in your server's namespace, but do not anymore. The client
417    # will make a new request for the document at its new location.
418    # Example:
419    # Redirect permanent /foo http://www.example.com/bar
420
421    #
422    # Alias: Maps web paths into filesystem paths and is used to
423    # access content that does not live under the DocumentRoot.
424    # Example:
425    # Alias /webpath /full/filesystem/path
426    #
427    # If you include a trailing / on /webpath then the server will
428    # require it to be present in the URL.  You will also likely
429    # need to provide a <Directory> section to allow access to
430    # the filesystem path.
431
432    #
433    # ScriptAlias: This controls which directories contain server scripts.
434    # ScriptAliases are essentially the same as Aliases, except that
435    # documents in the target directory are treated as applications and
436    # run by the server when requested rather than as documents sent to the
437    # client.  The same rules about trailing "/" apply to ScriptAlias
438    # directives as to Alias.
439    #
440    #ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"
441    ScriptAlias /cgi-bin/ "E:/ibisq/cgi-bin/"
442   
443</IfModule>
444
445<IfModule cgid_module>
446    #
447    # ScriptSock: On threaded servers, designate the path to the UNIX
448    # socket used to communicate with the CGI daemon of mod_cgid.
449    #
450    #Scriptsock cgisock
451</IfModule>
452
453#
454# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased
455# CGI directory exists, if you have that configured.
456#
457#<Directory "${SRVROOT}/cgi-bin">
458#    AllowOverride None
459#    Options None
460#    Require all granted
461#</Directory>
462
463<Directory "E:/ibisq/cgi-bin">
464    AllowOverride None
465    Options None
466    Require all granted
467</Directory>
468
469<IfModule headers_module>
470    #
471    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
472    # backend servers which have lingering "httpoxy" defects.
473    # 'Proxy' request header is undefined by the IETF, not listed by IANA
474    #
475    RequestHeader unset Proxy early
476</IfModule>
477
478<IfModule mime_module>
479    #
480    # TypesConfig points to the file containing the list of mappings from
481    # filename extension to MIME-type.
482    #
483    TypesConfig conf/mime.types
484
485    #
486    # AddType allows you to add to or override the MIME configuration
487    # file specified in TypesConfig for specific file types.
488    #
489    #AddType application/x-gzip .tgz
490    #
491    # AddEncoding allows you to have certain browsers uncompress
492    # information on the fly. Note: Not all browsers support this.
493    #
494    #AddEncoding x-compress .Z
495    #AddEncoding x-gzip .gz .tgz
496    #
497    # If the AddEncoding directives above are commented-out, then you
498    # probably should define those extensions to indicate media types:
499    #
500    AddType application/x-compress .Z
501    AddType application/x-gzip .gz .tgz
502
503    #
504    # AddHandler allows you to map certain file extensions to "handlers":
505    # actions unrelated to filetype. These can be either built into the server
506    # or added with the Action directive (see below)
507    #
508    # To use CGI scripts outside of ScriptAliased directories:
509    # (You will also need to add "ExecCGI" to the "Options" directive.)
510    #
511    #AddHandler cgi-script .cgi
512
513    # For type maps (negotiated resources):
514    #AddHandler type-map var
515
516    #
517    # Filters allow you to process content before it is sent to the client.
518    #
519    # To parse .shtml files for server-side includes (SSI):
520    # (You will also need to add "Includes" to the "Options" directive.)
521    #
522    #AddType text/html .shtml
523    #AddOutputFilter INCLUDES .shtml
524</IfModule>
525
526#
527# The mod_mime_magic module allows the server to use various hints from the
528# contents of the file itself to determine its type.  The MIMEMagicFile
529# directive tells the module where the hint definitions are located.
530#
531#MIMEMagicFile conf/magic
532
533#
534# Customizable error responses come in three flavors:
535# 1) plain text 2) local redirects 3) external redirects
536#
537# Some examples:
538#ErrorDocument 500 "The server made a boo boo."
539#ErrorDocument 404 /missing.html
540#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
541#ErrorDocument 402 http://www.example.com/subscription_info.html
542#
543
544#
545# MaxRanges: Maximum number of Ranges in a request before
546# returning the entire resource, or one of the special
547# values 'default', 'none' or 'unlimited'.
548# Default setting is to accept 200 Ranges.
549#MaxRanges unlimited
550
551#
552# EnableMMAP and EnableSendfile: On systems that support it,
553# memory-mapping or the sendfile syscall may be used to deliver
554# files.  This usually improves server performance, but must
555# be turned off when serving from networked-mounted
556# filesystems or if support for these functions is otherwise
557# broken on your system.
558# Defaults: EnableMMAP On, EnableSendfile Off
559#
560#EnableMMAP off
561#EnableSendfile on
562
563# Supplemental configuration
564#
565# The configuration files in the conf/extra/ directory can be
566# included to add extra features or to modify the default configuration of
567# the server, or you may simply copy their contents here and change as
568# necessary.
569
570# Server-pool management (MPM specific)
571Include conf/extra/httpd-mpm.conf
572
573# Multi-language error messages
574#Include conf/extra/httpd-multilang-errordoc.conf
575
576# Fancy directory listings
577#Include conf/extra/httpd-autoindex.conf
578
579# Language settings
580#Include conf/extra/httpd-languages.conf
581
582# User home directories
583#Include conf/extra/httpd-userdir.conf
584
585# Real-time info on requests and configuration
586#Include conf/extra/httpd-info.conf
587
588# Virtual hosts
589Include conf/extra/httpd-vhosts.conf
590
591# Local access to the Apache HTTP Server Manual
592#Include conf/extra/httpd-manual.conf
593
594# Distributed authoring and versioning (WebDAV)
595#Include conf/extra/httpd-dav.conf
596
597# Various default settings
598#Include conf/extra/httpd-default.conf
599
600# Configure mod_proxy_html to understand HTML4/XHTML1
601<IfModule proxy_html_module>
602Include conf/extra/proxy-html.conf
603</IfModule>
604
605# Secure (SSL/TLS) connections
606Include conf/extra/httpd-ssl.conf
607#
608# Note: The following must must be present to support
609#       starting without SSL on platforms with no /dev/random equivalent
610#       but a statically compiled-in mod_ssl.
611#
612<IfModule ssl_module>
613SSLRandomSeed startup builtin
614SSLRandomSeed connect builtin
615</IfModule>
616
Note: See TracBrowser for help on using the repository browser.