source: main/adopters/md/trunk/src/main/reverse_proxy/conf/httpd.conf @ 25387

Last change on this file since 25387 was 25387, checked in by Paul Leo, 2 months ago

Updating rotatelogs sections to use correct folders, logs and exectuable

File size: 20.4 KB
Line 
1#
2# This is the main Apache HTTP server configuration file.  It contains the
3# configuration directives that give the server its instructions.
4# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
5# In particular, see
6# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
7# for a discussion of each configuration directive.
8#
9# Do NOT simply read the instructions in here without understanding
10# what they do.  They're here only as hints or reminders.  If you are unsure
11# consult the online docs. You have been warned. 
12#
13# Configuration and logfile names: If the filenames you specify for many
14# of the server's control files begin with "/" (or "drive:/" for Win32), the
15# server will use that explicit path.  If the filenames do *not* begin
16# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
17# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
18# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
19# will be interpreted as '/logs/access_log'.
20#
21# NOTE: Where filenames are specified, you must use forward slashes
22# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
23# If a drive letter is omitted, the drive on which httpd.exe is located
24# will be used by default.  It is recommended that you always supply
25# an explicit drive letter in absolute paths to avoid confusion.
26
27#
28# ServerRoot: The top of the directory tree under which the server's
29# configuration, error, and log files are kept.
30#
31# Do not add a slash at the end of the directory path.  If you point
32# ServerRoot at a non-local disk, be sure to specify a local disk on the
33# Mutex directive, if file-based mutexes are used.  If you wish to share the
34# same ServerRoot for multiple httpd daemons, you will need to change at
35# least PidFile.
36#
37Define SRVROOT "c:/ApacheHttpd_2.4.54"
38
39ServerRoot "${SRVROOT}"
40
41#
42# Mutex: Allows you to set the mutex mechanism and mutex file directory
43# for individual mutexes, or change the global defaults
44#
45# Uncomment and change the directory if mutexes are file-based and the default
46# mutex file directory is not on a local disk or is not appropriate for some
47# other reason.
48#
49# Mutex default:logs
50
51#
52# Listen: Allows you to bind Apache to specific IP addresses and/or
53# ports, instead of the default. See also the <VirtualHost>
54# directive.
55#
56# Change this to Listen on specific IP addresses as shown below to
57# prevent Apache from glomming onto all bound IP addresses.
58#
59#Listen 12.34.56.78:80
60#Listen 80
61
62#
63# Dynamic Shared Object (DSO) Support
64#
65# To be able to use the functionality of a module which was built as a DSO you
66# have to place corresponding `LoadModule' lines at this location so the
67# directives contained in it are actually available _before_ they are used.
68# Statically compiled modules (those listed by `httpd -l') do not need
69# to be loaded here.
70#
71# Example:
72# LoadModule foo_module modules/mod_foo.so
73#
74#LoadModule access_compat_module modules/mod_access_compat.so
75LoadModule actions_module modules/mod_actions.so
76LoadModule alias_module modules/mod_alias.so
77LoadModule allowmethods_module modules/mod_allowmethods.so
78LoadModule asis_module modules/mod_asis.so
79LoadModule auth_basic_module modules/mod_auth_basic.so
80#LoadModule auth_digest_module modules/mod_auth_digest.so
81#LoadModule auth_form_module modules/mod_auth_form.so
82#LoadModule authn_anon_module modules/mod_authn_anon.so
83LoadModule authn_core_module modules/mod_authn_core.so
84#LoadModule authn_dbd_module modules/mod_authn_dbd.so
85#LoadModule authn_dbm_module modules/mod_authn_dbm.so
86LoadModule authn_file_module modules/mod_authn_file.so
87#LoadModule authn_socache_module modules/mod_authn_socache.so
88#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
89#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
90LoadModule authz_core_module modules/mod_authz_core.so
91#LoadModule authz_dbd_module modules/mod_authz_dbd.so
92#LoadModule authz_dbm_module modules/mod_authz_dbm.so
93LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
94LoadModule authz_host_module modules/mod_authz_host.so
95#LoadModule authz_owner_module modules/mod_authz_owner.so
96LoadModule authz_user_module modules/mod_authz_user.so
97LoadModule autoindex_module modules/mod_autoindex.so
98#LoadModule brotli_module modules/mod_brotli.so
99#LoadModule buffer_module modules/mod_buffer.so
100#LoadModule cache_module modules/mod_cache.so
101#LoadModule cache_disk_module modules/mod_cache_disk.so
102#LoadModule cache_socache_module modules/mod_cache_socache.so
103#LoadModule cern_meta_module modules/mod_cern_meta.so
104LoadModule cgi_module modules/mod_cgi.so
105#LoadModule charset_lite_module modules/mod_charset_lite.so
106#LoadModule data_module modules/mod_data.so
107#LoadModule dav_module modules/mod_dav.so
108#LoadModule dav_fs_module modules/mod_dav_fs.so
109#LoadModule dav_lock_module modules/mod_dav_lock.so
110#LoadModule dbd_module modules/mod_dbd.so
111#LoadModule deflate_module modules/mod_deflate.so
112####LoadModule dir_module modules/mod_dir.so
113#LoadModule dumpio_module modules/mod_dumpio.so
114LoadModule env_module modules/mod_env.so
115#LoadModule expires_module modules/mod_expires.so
116#LoadModule ext_filter_module modules/mod_ext_filter.so
117#LoadModule file_cache_module modules/mod_file_cache.so
118#LoadModule filter_module modules/mod_filter.so
119#LoadModule http2_module modules/mod_http2.so
120#LoadModule headers_module modules/mod_headers.so
121#LoadModule heartbeat_module modules/mod_heartbeat.so
122#LoadModule heartmonitor_module modules/mod_heartmonitor.so
123#LoadModule ident_module modules/mod_ident.so
124#LoadModule imagemap_module modules/mod_imagemap.so
125LoadModule include_module modules/mod_include.so
126#LoadModule info_module modules/mod_info.so
127LoadModule isapi_module modules/mod_isapi.so
128#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
129#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
130#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
131#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
132#LoadModule ldap_module modules/mod_ldap.so
133#LoadModule logio_module modules/mod_logio.so
134LoadModule log_config_module modules/mod_log_config.so
135#LoadModule log_debug_module modules/mod_log_debug.so
136#LoadModule log_forensic_module modules/mod_log_forensic.so
137#LoadModule lua_module modules/mod_lua.so
138#LoadModule macro_module modules/mod_macro.so
139#LoadModule md_module modules/mod_md.so
140LoadModule mime_module modules/mod_mime.so
141#LoadModule mime_magic_module modules/mod_mime_magic.so
142LoadModule negotiation_module modules/mod_negotiation.so
143LoadModule proxy_module modules/mod_proxy.so
144#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
145#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
146#LoadModule proxy_connect_module modules/mod_proxy_connect.so
147#LoadModule proxy_express_module modules/mod_proxy_express.so
148#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
149#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
150#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
151#LoadModule proxy_html_module modules/mod_proxy_html.so
152LoadModule proxy_http_module modules/mod_proxy_http.so
153#LoadModule proxy_http2_module modules/mod_proxy_http2.so
154#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
155#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
156#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
157#LoadModule ratelimit_module modules/mod_ratelimit.so
158#LoadModule reflector_module modules/mod_reflector.so
159LoadModule remoteip_module modules/mod_remoteip.so
160#LoadModule request_module modules/mod_request.so
161#LoadModule reqtimeout_module modules/mod_reqtimeout.so
162LoadModule rewrite_module modules/mod_rewrite.so
163#LoadModule sed_module modules/mod_sed.so
164#LoadModule session_module modules/mod_session.so
165#LoadModule session_cookie_module modules/mod_session_cookie.so
166#LoadModule session_crypto_module modules/mod_session_crypto.so
167#LoadModule session_dbd_module modules/mod_session_dbd.so
168LoadModule setenvif_module modules/mod_setenvif.so
169#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
170#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
171#LoadModule socache_dbm_module modules/mod_socache_dbm.so
172#LoadModule socache_memcache_module modules/mod_socache_memcache.so
173#LoadModule socache_redis_module modules/mod_socache_redis.so
174LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
175#LoadModule speling_module modules/mod_speling.so
176LoadModule ssl_module modules/mod_ssl.so
177#LoadModule status_module modules/mod_status.so
178#LoadModule substitute_module modules/mod_substitute.so
179#LoadModule unique_id_module modules/mod_unique_id.so
180#LoadModule userdir_module modules/mod_userdir.so
181#LoadModule usertrack_module modules/mod_usertrack.so
182#LoadModule version_module modules/mod_version.so
183#LoadModule vhost_alias_module modules/mod_vhost_alias.so
184#LoadModule watchdog_module modules/mod_watchdog.so
185#LoadModule xml2enc_module modules/mod_xml2enc.so
186
187<IfModule unixd_module>
188#
189# If you wish httpd to run as a different user or group, you must run
190# httpd as root initially and it will switch. 
191#
192# User/Group: The name (or #number) of the user/group to run httpd as.
193# It is usually good practice to create a dedicated user and group for
194# running httpd, as with most system services.
195#
196User daemon
197Group daemon
198
199</IfModule>
200
201# 'Main' server configuration
202#
203# The directives in this section set up the values used by the 'main'
204# server, which responds to any requests that aren't handled by a
205# <VirtualHost> definition.  These values also provide defaults for
206# any <VirtualHost> containers you may define later in the file.
207#
208# All of these directives may appear inside <VirtualHost> containers,
209# in which case these default settings will be overridden for the
210# virtual host being defined.
211#
212
213#
214# ServerAdmin: Your address, where problems with the server should be
215# e-mailed.  This address appears on some server-generated pages, such
216# as error documents.  e.g. admin@your-domain.com
217#
218#ServerAdmin admin@example.com
219ServerAdmin mdh.brfss@maryland.gov
220#
221# ServerName gives the name and port that the server uses to identify itself.
222# This can often be determined automatically, but we recommend you specify
223# it explicitly to prevent problems during startup.
224#
225# If your host doesn't have a registered DNS name, enter its IP address here.
226#
227#ServerName www.example.com:80
228
229#
230# Deny access to the entirety of your server's filesystem. You must
231# explicitly permit access to web content directories in other
232# <Directory> blocks below.
233#
234<Directory />
235    AllowOverride none
236    Require all denied
237</Directory>
238
239#
240# Note that from this point forward you must specifically allow
241# particular features to be enabled - so if something's not working as
242# you might expect, make sure that you have specifically enabled it
243# below.
244#
245
246#
247# DocumentRoot: The directory out of which you will serve your
248# documents. By default, all requests are taken from this directory, but
249# symbolic links and aliases may be used to point to other locations.
250#
251DocumentRoot "${SRVROOT}/htdocs"
252<Directory "${SRVROOT}/htdocs">
253    #
254    # Possible values for the Options directive are "None", "All",
255    # or any combination of:
256    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
257    #
258    # Note that "MultiViews" must be named *explicitly* --- "Options All"
259    # doesn't give it to you.
260    #
261    # The Options directive is both complicated and important.  Please see
262    # http://httpd.apache.org/docs/2.4/mod/core.html#options
263    # for more information.
264    #
265    #Options Indexes FollowSymLinks
266        Options None
267
268    #
269    # AllowOverride controls what directives may be placed in .htaccess files.
270    # It can be "All", "None", or any combination of the keywords:
271    #   AllowOverride FileInfo AuthConfig Limit
272    #
273    AllowOverride None
274
275    #
276    # Controls who can get stuff from this server.
277    #
278    Require all granted
279</Directory>
280
281#
282# DirectoryIndex: sets the file that Apache will serve if a directory
283# is requested.
284#
285<IfModule dir_module>
286    DirectoryIndex index.html
287</IfModule>
288
289#
290# The following lines prevent .htaccess and .htpasswd files from being
291# viewed by Web clients.
292#
293<Files ".ht*">
294    Require all denied
295</Files>
296
297#
298# ErrorLog: The location of the error log file.
299# If you do not specify an ErrorLog directive within a <VirtualHost>
300# container, error messages relating to that virtual host will be
301# logged here.  If you *do* define an error logfile for a <VirtualHost>
302# container, that host's errors will be logged there and not here.
303#
304#ErrorLog "logs/error.log"
305ErrorLog "|C:/ApacheHttpd_2.4.54/bin/rotatelogs.exe -l ${SRVROOT}/logs/error_log.%Y-%m-%d.log 10MB"
306
307#
308# LogLevel: Control the number of messages logged to the error_log.
309# Possible values include: debug, info, notice, warn, error, crit,
310# alert, emerg.
311#
312LogLevel warn
313
314<IfModule log_config_module>
315    #
316    # The following directives define some format nicknames for use with
317    # a CustomLog directive (see below).
318    #
319    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
320    LogFormat "%h %l %u %t \"%r\" %>s %b" common
321
322    <IfModule logio_module>
323      # You need to enable mod_logio.c to use %I and %O
324      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
325    </IfModule>
326
327    #
328    # The location and format of the access logfile (Common Logfile Format).
329    # If you do not define any access logfiles within a <VirtualHost>
330    # container, they will be logged here.  Contrariwise, if you *do*
331    # define per-<VirtualHost> access logfiles, transactions will be
332    # logged therein and *not* in this file.
333    # NOTE USING LOG DEFINED IN hhpd-ssl.conf
334    #CustomLog "logs/access.log" common
335
336    #
337    # If you prefer a logfile with access, agent, and referer information
338    # (Combined Logfile Format) you can use the following directive.
339    #
340    #CustomLog "logs/access.log" combined
341</IfModule>
342
343<IfModule alias_module>
344    #
345    # Redirect: Allows you to tell clients about documents that used to
346    # exist in your server's namespace, but do not anymore. The client
347    # will make a new request for the document at its new location.
348    # Example:
349    # Redirect permanent /foo http://www.example.com/bar
350
351    #
352    # Alias: Maps web paths into filesystem paths and is used to
353    # access content that does not live under the DocumentRoot.
354    # Example:
355    # Alias /webpath /full/filesystem/path
356    #
357    # If you include a trailing / on /webpath then the server will
358    # require it to be present in the URL.  You will also likely
359    # need to provide a <Directory> section to allow access to
360    # the filesystem path.
361
362    #
363    # ScriptAlias: This controls which directories contain server scripts.
364    # ScriptAliases are essentially the same as Aliases, except that
365    # documents in the target directory are treated as applications and
366    # run by the server when requested rather than as documents sent to the
367    # client.  The same rules about trailing "/" apply to ScriptAlias
368    # directives as to Alias.
369    #
370    ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"
371
372</IfModule>
373
374<IfModule cgid_module>
375    #
376    # ScriptSock: On threaded servers, designate the path to the UNIX
377    # socket used to communicate with the CGI daemon of mod_cgid.
378    #
379    #Scriptsock cgisock
380</IfModule>
381
382#
383# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased
384# CGI directory exists, if you have that configured.
385#
386<Directory "${SRVROOT}/cgi-bin">
387    AllowOverride None
388    Options None
389    Require all denied
390</Directory>
391
392<IfModule headers_module>
393    #
394    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
395    # backend servers which have lingering "httpoxy" defects.
396    # 'Proxy' request header is undefined by the IETF, not listed by IANA
397    #
398    RequestHeader unset Proxy early
399</IfModule>
400
401<IfModule mime_module>
402    #
403    # TypesConfig points to the file containing the list of mappings from
404    # filename extension to MIME-type.
405    #
406    TypesConfig conf/mime.types
407
408    #
409    # AddType allows you to add to or override the MIME configuration
410    # file specified in TypesConfig for specific file types.
411    #
412    #AddType application/x-gzip .tgz
413    #
414    # AddEncoding allows you to have certain browsers uncompress
415    # information on the fly. Note: Not all browsers support this.
416    #
417    #AddEncoding x-compress .Z
418    #AddEncoding x-gzip .gz .tgz
419    #
420    # If the AddEncoding directives above are commented-out, then you
421    # probably should define those extensions to indicate media types:
422    #
423    AddType application/x-compress .Z
424    AddType application/x-gzip .gz .tgz
425
426    #
427    # AddHandler allows you to map certain file extensions to "handlers":
428    # actions unrelated to filetype. These can be either built into the server
429    # or added with the Action directive (see below)
430    #
431    # To use CGI scripts outside of ScriptAliased directories:
432    # (You will also need to add "ExecCGI" to the "Options" directive.)
433    #
434    #AddHandler cgi-script .cgi
435
436    # For type maps (negotiated resources):
437    #AddHandler type-map var
438
439    #
440    # Filters allow you to process content before it is sent to the client.
441    #
442    # To parse .shtml files for server-side includes (SSI):
443    # (You will also need to add "Includes" to the "Options" directive.)
444    #
445    #AddType text/html .shtml
446    #AddOutputFilter INCLUDES .shtml
447</IfModule>
448
449#
450# The mod_mime_magic module allows the server to use various hints from the
451# contents of the file itself to determine its type.  The MIMEMagicFile
452# directive tells the module where the hint definitions are located.
453#
454#MIMEMagicFile conf/magic
455
456#
457# Customizable error responses come in three flavors:
458# 1) plain text 2) local redirects 3) external redirects
459#
460# Some examples:
461#ErrorDocument 500 "The server made a boo boo."
462#ErrorDocument 404 /missing.html
463#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
464#ErrorDocument 402 http://www.example.com/subscription_info.html
465#
466
467#
468# MaxRanges: Maximum number of Ranges in a request before
469# returning the entire resource, or one of the special
470# values 'default', 'none' or 'unlimited'.
471# Default setting is to accept 200 Ranges.
472#MaxRanges unlimited
473
474#
475# EnableMMAP and EnableSendfile: On systems that support it,
476# memory-mapping or the sendfile syscall may be used to deliver
477# files.  This usually improves server performance, but must
478# be turned off when serving from networked-mounted
479# filesystems or if support for these functions is otherwise
480# broken on your system.
481# Defaults: EnableMMAP On, EnableSendfile Off
482#
483#EnableMMAP off
484#EnableSendfile on
485
486# Supplemental configuration
487#
488# The configuration files in the conf/extra/ directory can be
489# included to add extra features or to modify the default configuration of
490# the server, or you may simply copy their contents here and change as
491# necessary.
492
493# Server-pool management (MPM specific)
494#Include conf/extra/httpd-mpm.conf
495
496# Multi-language error messages
497#Include conf/extra/httpd-multilang-errordoc.conf
498
499# Fancy directory listings
500#Include conf/extra/httpd-autoindex.conf
501
502# Language settings
503#Include conf/extra/httpd-languages.conf
504
505# User home directories
506#Include conf/extra/httpd-userdir.conf
507
508# Real-time info on requests and configuration
509#Include conf/extra/httpd-info.conf
510
511# Virtual hosts
512#Include conf/extra/httpd-vhosts.conf
513
514# Local access to the Apache HTTP Server Manual
515#Include conf/extra/httpd-manual.conf
516
517# Distributed authoring and versioning (WebDAV)
518#Include conf/extra/httpd-dav.conf
519
520# Various default settings
521#Include conf/extra/httpd-default.conf
522
523# Configure mod_proxy_html to understand HTML4/XHTML1
524<IfModule proxy_html_module>
525Include conf/extra/proxy-html.conf
526</IfModule>
527
528# Secure (SSL/TLS) connections
529##################Will want to include#Include conf/extra/httpd-ssl.conf
530#
531# Note: The following must must be present to support
532#       starting without SSL on platforms with no /dev/random equivalent
533#       but a statically compiled-in mod_ssl.
534#
535<IfModule ssl_module>
536SSLRandomSeed startup builtin
537SSLRandomSeed connect builtin
538</IfModule>
539
540#Include conf/extra/httpd-vhosts.conf
541
542Include conf/extra/httpd-ssl.conf
Note: See TracBrowser for help on using the repository browser.