source: main/adopters/hi/trunk/src/main/apache_httpd_configs/wordpress_ibis/prod/httpd.conf @ 25294

Last change on this file since 25294 was 25294, checked in by Paul Leo, 2 months ago

Tweaks to apache httpd configurations, commented out the test server on port 81, set an errorlog, for startup that will roll over daily

File size: 22.8 KB
Line 
1#
2# This is the main Apache HTTP server configuration file.  It contains the
3# configuration directives that give the server its instructions.
4# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
5# In particular, see
6# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
7# for a discussion of each configuration directive.
8#
9# Do NOT simply read the instructions in here without understanding
10# what they do.  They're here only as hints or reminders.  If you are unsure
11# consult the online docs. You have been warned. 
12#
13# Configuration and logfile names: If the filenames you specify for many
14# of the server's control files begin with "/" (or "drive:/" for Win32), the
15# server will use that explicit path.  If the filenames do *not* begin
16# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
17# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
18# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
19# will be interpreted as '/logs/access_log'.
20#
21# NOTE: Where filenames are specified, you must use forward slashes
22# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
23# If a drive letter is omitted, the drive on which httpd.exe is located
24# will be used by default.  It is recommended that you always supply
25# an explicit drive letter in absolute paths to avoid confusion.
26
27#
28# ServerRoot: The top of the directory tree under which the server's
29# configuration, error, and log files are kept.
30#
31# Do not add a slash at the end of the directory path.  If you point
32# ServerRoot at a non-local disk, be sure to specify a local disk on the
33# Mutex directive, if file-based mutexes are used.  If you wish to share the
34# same ServerRoot for multiple httpd daemons, you will need to change at
35# least PidFile.
36#
37Define SRVROOT "c:/Apache_2.4.53"
38
39ServerRoot "${SRVROOT}"
40
41#
42# Mutex: Allows you to set the mutex mechanism and mutex file directory
43# for individual mutexes, or change the global defaults
44#
45# Uncomment and change the directory if mutexes are file-based and the default
46# mutex file directory is not on a local disk or is not appropriate for some
47# other reason.
48#
49# Mutex default:logs
50
51#
52# Listen: Allows you to bind Apache to specific IP addresses and/or
53# ports, instead of the default. See also the <VirtualHost>
54# directive.
55#
56# Change this to Listen on specific IP addresses as shown below to
57# prevent Apache from glomming onto all bound IP addresses.
58#
59#Listen 12.34.56.78:80
60### Port 80 is Prod Wordpress, port 81 for now is hhdwtest for working with SSL on proxy
61Listen 80
62#### NOW NEW INSTANCE OF APACHE
63#### Listen 81
64
65#
66# Dynamic Shared Object (DSO) Support
67#
68# To be able to use the functionality of a module which was built as a DSO you
69# have to place corresponding `LoadModule' lines at this location so the
70# directives contained in it are actually available _before_ they are used.
71# Statically compiled modules (those listed by `httpd -l') do not need
72# to be loaded here.
73#
74# Example:
75# LoadModule foo_module modules/mod_foo.so
76#
77#LoadModule access_compat_module modules/mod_access_compat.so
78LoadModule actions_module modules/mod_actions.so
79LoadModule alias_module modules/mod_alias.so
80LoadModule allowmethods_module modules/mod_allowmethods.so
81LoadModule asis_module modules/mod_asis.so
82LoadModule auth_basic_module modules/mod_auth_basic.so
83#LoadModule auth_digest_module modules/mod_auth_digest.so
84#LoadModule auth_form_module modules/mod_auth_form.so
85#LoadModule authn_anon_module modules/mod_authn_anon.so
86LoadModule authn_core_module modules/mod_authn_core.so
87#LoadModule authn_dbd_module modules/mod_authn_dbd.so
88#LoadModule authn_dbm_module modules/mod_authn_dbm.so
89LoadModule authn_file_module modules/mod_authn_file.so
90#LoadModule authn_socache_module modules/mod_authn_socache.so
91#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
92#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
93LoadModule authz_core_module modules/mod_authz_core.so
94#LoadModule authz_dbd_module modules/mod_authz_dbd.so
95#LoadModule authz_dbm_module modules/mod_authz_dbm.so
96LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
97LoadModule authz_host_module modules/mod_authz_host.so
98#LoadModule authz_owner_module modules/mod_authz_owner.so
99LoadModule authz_user_module modules/mod_authz_user.so
100LoadModule autoindex_module modules/mod_autoindex.so
101#LoadModule brotli_module modules/mod_brotli.so
102#LoadModule buffer_module modules/mod_buffer.so
103#LoadModule cache_module modules/mod_cache.so
104#LoadModule cache_disk_module modules/mod_cache_disk.so
105#LoadModule cache_socache_module modules/mod_cache_socache.so
106#LoadModule cern_meta_module modules/mod_cern_meta.so
107LoadModule cgi_module modules/mod_cgi.so
108#LoadModule charset_lite_module modules/mod_charset_lite.so
109#LoadModule data_module modules/mod_data.so
110#LoadModule dav_module modules/mod_dav.so
111#LoadModule dav_fs_module modules/mod_dav_fs.so
112#LoadModule dav_lock_module modules/mod_dav_lock.so
113#LoadModule dbd_module modules/mod_dbd.so
114#LoadModule deflate_module modules/mod_deflate.so
115LoadModule dir_module modules/mod_dir.so
116#LoadModule dumpio_module modules/mod_dumpio.so
117LoadModule env_module modules/mod_env.so
118#LoadModule expires_module modules/mod_expires.so
119#LoadModule ext_filter_module modules/mod_ext_filter.so
120#LoadModule file_cache_module modules/mod_file_cache.so
121#LoadModule filter_module modules/mod_filter.so
122#LoadModule http2_module modules/mod_http2.so
123#LoadModule headers_module modules/mod_headers.so
124#LoadModule heartbeat_module modules/mod_heartbeat.so
125#LoadModule heartmonitor_module modules/mod_heartmonitor.so
126#LoadModule ident_module modules/mod_ident.so
127#LoadModule imagemap_module modules/mod_imagemap.so
128LoadModule include_module modules/mod_include.so
129#LoadModule info_module modules/mod_info.so
130LoadModule isapi_module modules/mod_isapi.so
131#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
132#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
133#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
134#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
135#LoadModule ldap_module modules/mod_ldap.so
136#LoadModule logio_module modules/mod_logio.so
137LoadModule log_config_module modules/mod_log_config.so
138#LoadModule log_debug_module modules/mod_log_debug.so
139#LoadModule log_forensic_module modules/mod_log_forensic.so
140#LoadModule lua_module modules/mod_lua.so
141#LoadModule macro_module modules/mod_macro.so
142#LoadModule md_module modules/mod_md.so
143LoadModule mime_module modules/mod_mime.so
144#LoadModule mime_magic_module modules/mod_mime_magic.so
145LoadModule negotiation_module modules/mod_negotiation.so
146LoadModule proxy_module modules/mod_proxy.so
147#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
148#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
149#LoadModule proxy_connect_module modules/mod_proxy_connect.so
150#LoadModule proxy_express_module modules/mod_proxy_express.so
151#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
152#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
153#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
154#LoadModule proxy_html_module modules/mod_proxy_html.so
155LoadModule proxy_http_module modules/mod_proxy_http.so
156#LoadModule proxy_http2_module modules/mod_proxy_http2.so
157#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
158#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
159#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
160#LoadModule ratelimit_module modules/mod_ratelimit.so
161#LoadModule reflector_module modules/mod_reflector.so
162#LoadModule remoteip_module modules/mod_remoteip.so
163#LoadModule request_module modules/mod_request.so
164#LoadModule reqtimeout_module modules/mod_reqtimeout.so
165LoadModule rewrite_module modules/mod_rewrite.so
166#LoadModule sed_module modules/mod_sed.so
167#LoadModule session_module modules/mod_session.so
168#LoadModule session_cookie_module modules/mod_session_cookie.so
169#LoadModule session_crypto_module modules/mod_session_crypto.so
170#LoadModule session_dbd_module modules/mod_session_dbd.so
171LoadModule setenvif_module modules/mod_setenvif.so
172#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
173#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
174#LoadModule socache_dbm_module modules/mod_socache_dbm.so
175#LoadModule socache_memcache_module modules/mod_socache_memcache.so
176#LoadModule socache_redis_module modules/mod_socache_redis.so
177######LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
178#LoadModule speling_module modules/mod_speling.so
179#####LoadModule ssl_module modules/mod_ssl.so
180LoadModule status_module modules/mod_status.so
181#LoadModule substitute_module modules/mod_substitute.so
182#LoadModule unique_id_module modules/mod_unique_id.so
183#LoadModule userdir_module modules/mod_userdir.so
184#LoadModule usertrack_module modules/mod_usertrack.so
185#LoadModule version_module modules/mod_version.so
186#LoadModule vhost_alias_module modules/mod_vhost_alias.so
187#LoadModule watchdog_module modules/mod_watchdog.so
188#LoadModule xml2enc_module modules/mod_xml2enc.so
189LoadModule php_module "c:/php8/php8apache2_4.dll"
190PHPIniDir "c:/php8"
191
192<IfModule unixd_module>
193#
194# If you wish httpd to run as a different user or group, you must run
195# httpd as root initially and it will switch. 
196#
197# User/Group: The name (or #number) of the user/group to run httpd as.
198# It is usually good practice to create a dedicated user and group for
199# running httpd, as with most system services.
200#
201User daemon
202Group daemon
203
204</IfModule>
205
206# 'Main' server configuration
207#
208# The directives in this section set up the values used by the 'main'
209# server, which responds to any requests that aren't handled by a
210# <VirtualHost> definition.  These values also provide defaults for
211# any <VirtualHost> containers you may define later in the file.
212#
213# All of these directives may appear inside <VirtualHost> containers,
214# in which case these default settings will be overridden for the
215# virtual host being defined.
216#
217
218#
219# ServerAdmin: Your address, where problems with the server should be
220# e-mailed.  This address appears on some server-generated pages, such
221# as error documents.  e.g. admin@your-domain.com
222#
223ServerAdmin kbenson@hhdw.org
224
225#
226# ServerName gives the name and port that the server uses to identify itself.
227# This can often be determined automatically, but we recommend you specify
228# it explicitly to prevent problems during startup.
229#
230# If your host doesn't have a registered DNS name, enter its IP address here.
231#
232#ServerName www.example.com:80
233#ServerName test.hhdw.org
234ServerName 10.0.1.108
235
236#
237# Deny access to the entirety of your server's filesystem. You must
238# explicitly permit access to web content directories in other
239# <Directory> blocks below.
240#
241<Directory />
242    AllowOverride none
243    Require all denied
244</Directory>
245
246#
247# Note that from this point forward you must specifically allow
248# particular features to be enabled - so if something's not working as
249# you might expect, make sure that you have specifically enabled it
250# below.
251#
252
253#
254# DocumentRoot: The directory out of which you will serve your
255# documents. By default, all requests are taken from this directory, but
256# symbolic links and aliases may be used to point to other locations.
257#
258####DocumentRoot "${SRVROOT}/htdocs"
259####<Directory "${SRVROOT}/htdocs">
260DocumentRoot "c:/hhdw"
261<Directory "c:/hhdw"> 
262
263    #
264    # Possible values for the Options directive are "None", "All",
265    # or any combination of:
266    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
267    #
268    # Note that "MultiViews" must be named *explicitly* --- "Options All"
269    # doesn't give it to you.
270    #
271    # The Options directive is both complicated and important.  Please see
272    # http://httpd.apache.org/docs/2.4/mod/core.html#options
273    # for more information.
274    #
275    #Options Indexes FollowSymLinks
276        #### No need to display Indexes
277        Options FollowSymLinks
278
279    #
280    # AllowOverride controls what directives may be placed in .htaccess files.
281    # It can be "All", "None", or any combination of the keywords:
282    #   AllowOverride FileInfo AuthConfig Limit
283    #
284    ####AllowOverride None
285        AllowOverride All
286
287    #
288    # Controls who can get stuff from this server.
289    #
290    Require all granted
291</Directory>
292
293#### Location of PhpMyAdmin
294#### Must be on localhost to run
295<Directory "c:/hhdw/tools"> 
296        Options Indexes FollowSymLinks
297        Require local
298</Directory>
299
300#
301# DirectoryIndex: sets the file that Apache will serve if a directory
302# is requested.
303#
304####<IfModule dir_module>
305####    DirectoryIndex index.html
306####</IfModule>
307<IfModule dir_module>
308    DirectoryIndex index.html index.php
309</IfModule>
310
311#
312# The following lines prevent .htaccess and .htpasswd files from being
313# viewed by Web clients.
314#
315<Files ".ht*">
316    Require all denied
317</Files>
318
319#
320# ErrorLog: The location of the error log file.
321# If you do not specify an ErrorLog directive within a <VirtualHost>
322# container, error messages relating to that virtual host will be
323# logged here.  If you *do* define an error logfile for a <VirtualHost>
324# container, that host's errors will be logged there and not here.
325#
326###ErrorLog "logs/error.log"
327
328# For use of rotatelogs, see https://httpd.apache.org/docs/2.4/programs/rotatelogs.html
329# am using rotate every day and keep 7 days, could keep more.
330# you could also rotate at midnight and create a log with date, but keeping only x logs will not work with that
331### NOTE: -c not permitted in windows, may be other options also not permitted, see explanation in next section log_conf_module
332# -v is verbose output for debugging, BUT...
333# try first with access, if you try with Errorlog, and you have something wrong, no log will be produced.
334# note daily is 86400, testing is 60 (every minute)
335# Next line is for testing log rotation every 20 seconds, keep 7 files, verbose output
336# ErrorLog "|bin/rotatelogs.exe -l -v -n 7 logs/error.log 20"
337##### Now set in httpd-vhosts.conf #####
338# Next line is for production, rotate every day, keep 14 logs
339ErrorLog "|bin/rotatelogs.exe -l -f -v -n 14 logs/error.log 86400"
340
341#
342# LogLevel: Control the number of messages logged to the error_log.
343# Possible values include: debug, info, notice, warn, error, crit,
344# alert, emerg.
345#
346####LogLevel debug ssl:trace8 proxy:trace8
347
348LogLevel warn
349
350
351<IfModule log_config_module>
352    #
353    # The following directives define some format nicknames for use with
354    # a CustomLog directive (see below).
355    #
356    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
357    LogFormat "%h %l %u %t \"%r\" %>s %b" common
358
359    <IfModule logio_module>
360      # You need to enable mod_logio.c to use %I and %O
361      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
362    </IfModule>
363
364    #
365    # The location and format of the access logfile (Common Logfile Format).
366    # If you do not define any access logfiles within a <VirtualHost>
367    # container, they will be logged here.  Contrariwise, if you *do*
368    # define per-<VirtualHost> access logfiles, transactions will be
369    # logged therein and *not* in this file.
370    #
371    ####CustomLog "logs/access.log" common
372
373    #
374    # If you prefer a logfile with access, agent, and referer information
375    # (Combined Logfile Format) you can use the following directive.
376    #
377    ####CustomLog "logs/access.log" combined
378       
379# For use of rotatelogs, see https://httpd.apache.org/docs/2.4/programs/rotatelogs.html
380# am using rotate every day and keep 7 days, could keep more.
381# you could also rotate at midnight and create a log with date, but keeping only x logs will not work with that
382### NOTE: -c not permitted in windows, may be other options also not permitted, see explanation in next section log_conf_module
383# -v is verbose output for debugging, BUT...
384# try first with access, if you try with Errorlog, and you have something wrong, no log will be produced.
385# note daily is 86400, testing is 60 (every minute)
386
387##### NOW SET IN HTTPD-VHOSTES.CONF ######
388# Next line is for testing log rotation every 20 seconds, keep 7 files, verbose output 
389       
390####    CustomLog "|bin/rotatelogs.exe -l -f -v -n 14 logs/access.log 86400" common
391                       
392                       
393       
394</IfModule>
395
396<IfModule alias_module>
397    #
398    # Redirect: Allows you to tell clients about documents that used to
399    # exist in your server's namespace, but do not anymore. The client
400    # will make a new request for the document at its new location.
401    # Example:
402    # Redirect permanent /foo http://www.example.com/bar
403
404    #
405    # Alias: Maps web paths into filesystem paths and is used to
406    # access content that does not live under the DocumentRoot.
407    # Example:
408    # Alias /webpath /full/filesystem/path
409    #
410    # If you include a trailing / on /webpath then the server will
411    # require it to be present in the URL.  You will also likely
412    # need to provide a <Directory> section to allow access to
413    # the filesystem path.
414
415    #
416    # ScriptAlias: This controls which directories contain server scripts.
417    # ScriptAliases are essentially the same as Aliases, except that
418    # documents in the target directory are treated as applications and
419    # run by the server when requested rather than as documents sent to the
420    # client.  The same rules about trailing "/" apply to ScriptAlias
421    # directives as to Alias.
422    #
423    ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"
424
425</IfModule>
426
427<IfModule cgid_module>
428    #
429    # ScriptSock: On threaded servers, designate the path to the UNIX
430    # socket used to communicate with the CGI daemon of mod_cgid.
431    #
432    #Scriptsock cgisock
433</IfModule>
434
435#
436# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased
437# CGI directory exists, if you have that configured.
438#
439<Directory "${SRVROOT}/cgi-bin">
440    AllowOverride None
441    Options None
442    Require all granted
443</Directory>
444
445<IfModule headers_module>
446    #
447    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
448    # backend servers which have lingering "httpoxy" defects.
449    # 'Proxy' request header is undefined by the IETF, not listed by IANA
450    #
451    RequestHeader unset Proxy early
452</IfModule>
453
454<IfModule mime_module>
455    #
456    # TypesConfig points to the file containing the list of mappings from
457    # filename extension to MIME-type.
458    #
459    TypesConfig conf/mime.types
460
461    #
462    # AddType allows you to add to or override the MIME configuration
463    # file specified in TypesConfig for specific file types.
464    #
465    #AddType application/x-gzip .tgz
466    #
467    # AddEncoding allows you to have certain browsers uncompress
468    # information on the fly. Note: Not all browsers support this.
469    #
470    #AddEncoding x-compress .Z
471    #AddEncoding x-gzip .gz .tgz
472    #
473    # If the AddEncoding directives above are commented-out, then you
474    # probably should define those extensions to indicate media types:
475    #
476    AddType application/x-compress .Z
477    AddType application/x-gzip .gz .tgz
478
479    #
480    # AddHandler allows you to map certain file extensions to "handlers":
481    # actions unrelated to filetype. These can be either built into the server
482    # or added with the Action directive (see below)
483    #
484    # To use CGI scripts outside of ScriptAliased directories:
485    # (You will also need to add "ExecCGI" to the "Options" directive.)
486    #
487    #AddHandler cgi-script .cgi
488        AddHandler application/x-httpd-php .php
489       
490    # For type maps (negotiated resources):
491    #AddHandler type-map var
492
493    #
494    # Filters allow you to process content before it is sent to the client.
495    #
496    # To parse .shtml files for server-side includes (SSI):
497    # (You will also need to add "Includes" to the "Options" directive.)
498    #
499    #AddType text/html .shtml
500    #AddOutputFilter INCLUDES .shtml
501</IfModule>
502
503#
504# The mod_mime_magic module allows the server to use various hints from the
505# contents of the file itself to determine its type.  The MIMEMagicFile
506# directive tells the module where the hint definitions are located.
507#
508#MIMEMagicFile conf/magic
509
510#
511# Customizable error responses come in three flavors:
512# 1) plain text 2) local redirects 3) external redirects
513#
514# Some examples:
515#ErrorDocument 500 "The server made a boo boo."
516#ErrorDocument 404 /missing.html
517#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
518#ErrorDocument 402 http://www.example.com/subscription_info.html
519#
520
521#
522# MaxRanges: Maximum number of Ranges in a request before
523# returning the entire resource, or one of the special
524# values 'default', 'none' or 'unlimited'.
525# Default setting is to accept 200 Ranges.
526#MaxRanges unlimited
527
528#
529# EnableMMAP and EnableSendfile: On systems that support it,
530# memory-mapping or the sendfile syscall may be used to deliver
531# files.  This usually improves server performance, but must
532# be turned off when serving from networked-mounted
533# filesystems or if support for these functions is otherwise
534# broken on your system.
535# Defaults: EnableMMAP On, EnableSendfile Off
536#
537#EnableMMAP off
538#EnableSendfile on
539
540# Supplemental configuration
541#
542# The configuration files in the conf/extra/ directory can be
543# included to add extra features or to modify the default configuration of
544# the server, or you may simply copy their contents here and change as
545# necessary.
546
547# Server-pool management (MPM specific)
548Include conf/extra/httpd-mpm.conf
549
550# Multi-language error messages
551#Include conf/extra/httpd-multilang-errordoc.conf
552
553# Fancy directory listings
554#Include conf/extra/httpd-autoindex.conf
555
556# Language settings
557#Include conf/extra/httpd-languages.conf
558
559# User home directories
560#Include conf/extra/httpd-userdir.conf
561
562# Real-time info on requests and configuration
563#Include conf/extra/httpd-info.conf
564
565# Virtual hosts
566Include conf/extra/httpd-vhosts.conf
567
568# Local access to the Apache HTTP Server Manual
569#Include conf/extra/httpd-manual.conf
570
571# Distributed authoring and versioning (WebDAV)
572#Include conf/extra/httpd-dav.conf
573
574# Various default settings
575#Include conf/extra/httpd-default.conf
576
577# Configure mod_proxy_html to understand HTML4/XHTML1
578<IfModule proxy_html_module>
579Include conf/extra/proxy-html.conf
580</IfModule>
581
582# Secure (SSL/TLS) connections
583######Include conf/extra/httpd-ssl.conf
584#
585# Note: The following must must be present to support
586#       starting without SSL on platforms with no /dev/random equivalent
587#       but a statically compiled-in mod_ssl.
588#
589<IfModule ssl_module>
590SSLRandomSeed startup builtin
591SSLRandomSeed connect builtin
592</IfModule>
593
594############## Limit Server Status #################
595#### Server Status
596####### Could add internal DOH addresses here as well ########
597<Location "/server-status">
598  SetHandler server-status
599        Require ip 10.0.1.108
600        Require ip 127.0.0.1
601        Require ip ::1
602</Location>
603
604
605
606
607
608
Note: See TracBrowser for help on using the repository browser.